-15%
In Stock

SURFCO GRIP WAX MAT

Desde: 39,00 Desde: 33,00

SKU: N/A Categories: ,

Description

SURFCO GRIP WAX MAT

  • Excellent wet grip
  • Grips like wax
  • Non-abrasive to the skin
  • Will not melt, no mess
  • Works well in all water temperatures
  • Will not yellow
  • Thin see through die-cut panels
  • Easy-to-apply peel and stick adhesive
  • Cleans up with soap and water

 

New and Clean Board Application
Note: Proper installation of the mats takes about the same amount of time as it takes to rub on a good coat of wax. Best not to be in a hurry.

  • Select desired locations and positions of the mats on the deck. A space of up to 1″ between mats is fine. If the board does not have a stringer or center line, lay a strip of masking tape down the center of the deck as a guide.
  • Board temperature must be above 65 degrees Fahrenheit for adhesive to bond to deck.
  • Peel off 3″-4″ of the liner at the end of the mat and press onto the deck. Peel off the rest of the linter and press the mat onto the deck. The mat can be lifted up and repositioned if necessary.
  • Press the entire mat firmly onto the board.
    Note: Use the end of a ruler, putty knife, wax scraper, or roller, and firmly press the mat onto the board as the liner is peeled off the adhesive. This prevents bubbles from forming under the panel.
  • Repeat process to the rest of the mats.

https://lpwindsurf.com/cat/surf/grip/

 

Additional information

MEDIDA

6´0, 6´6, 7´0

ANCHO

NORMAL, ANCHO( WIDE)

Reviews

There are no reviews yet.

Be the first to review “SURFCO GRIP WAX MAT”

Your email address will not be published. Required fields are marked *