Description
Starboard Wingboard Lite Tech 2022
High Performance Board for Wingfoiling
The new Wingboard range takes design inspiration from our high-performance SUP foil boards and Olympic class Windsurf foil boards – combining the speed and efficiency of foiling with the power of the wind.
The aim of the Wingboard Foil is to give you maximum performance in a small size while catering to your level, from beginner to expert.
JOIN THE LATEST INNOVATION!
THE SHAPE
To get started we need stability and since volume works on leverage, the further away the volume is from your feet, the more stability it creates. We placed the volume in the rails, at the square nose and at the little “platform” at the tail of the board. Stability is also created by having the feet as close to the foil as possible. We do not want to foil with “High Heels”, so the thinner a board is, the better it rides.
JOIN THE LATEST INNOVATION!
THE SHAPE
To get started we need stability and since volume works on leverage, the further away the volume is from your feet, the more stability it creates. We placed the volume in the rails, at the square nose and at the little “platform” at the tail of the board. Stability is also created by having the feet as close to the foil as possible. We do not want to foil with “High Heels”, so the thinner a board is, the better it rides.
FEATURES
RECESSED DECK
- Significantly improves stability as you have a lower centre of gravity. It also brings you closer to the foil for more control when up and riding.
BOXY RAILS
- Pack the volume where you need it, increasing the float and stability so you can ride a narrower and shorter board.
ROUND NOSE
- Makes it incredibly forgiving on touch downs as the nose bounces and skims off the large surface area, not sticking and slowing you down.
DRAINAGE CHANNELS
- At the tail of the board lets the water drain out immediately once foiling.
HIGH VOLUME TAIL
- Boosts the overall float to ride such small boards.
FLAT TAIL ROCKER
- And sharp rails forward increase ground speed until take off.
CHANNEL BOTTOM
- That get deeper towards the tail helps to pump, rock the board into release and also helps for stability.
CUTAWAY TAIL
- Allows the board to release that much earlier and reduces the rails from catching through turning.
NEW
FOOTSTRAP INSERTS
- The new 18cm distance between the inserts allows you to have a wider footstrap span for better trim and control while foiling since you can micro-adjust your position.
NEW
EXTRA LONG FOOTSTRAP
- A new larger foot strap that has a wider spread and it can also be made shorter, using different positions, for those who want the security necessary to launch into the air.Our new XL footstraps come with Blue Carbon. It can also be purchased aftermarket for Lite Tech and ASAP.
FOIL POSITION
- Is optimised to provide early lift for fast take offs and gives a very balanced trim when up and riding.
CARRY HANDLE
- The carry handle is moved to the bottom of the board to avoid interfering when foiling, The-Wall-Inflatable-Stand-Up-Paddle-Board-Starboard-SUP-Key-Feature-Flat-carry-handle.
NEW
SELF-VENTILATING VALVE
- A self-ventilating air valve is available on the board. This valve is self-ventilating so, it should not be touched or removed – otherwise, you are at risk of damaging the valve system.
Board Constructions
BLUE CARBON
´9x26
- Top grade 150g Biaxial Carbon wraps the entire board, ´9x26, ´9x26.
- 2 ´9x26, ´9x26.
- The combination of twin T-stringers deck and bottom work together to increase the overall total breakage strength.
- Multiple reinforcements in the standing area, ´9x26.
ASAP
´9x26
- Impact-resistant high-density EVA wrapping the whole rail from nose to tail.
- Multiple layers of high-grade fiberglass are wetted out in epoxy resin wrapping the hull.
- Australian pine on the standing area for extra impact resistance and rigidity.
- Extra rigidity with the introduction of unidirectional stringer bands and solid with added rail and nose reinforcements.
LITE TECH
LIGHT, STRONG, AFFORDABLE
- Extra rigidity with the introduction of unidirectional stringer bands and solid with added rail / • Multiple layers of high-grade fiberglass are wetted out in epoxy resin wrapping the hull.
- Australian pine on the standing area for extra impact resistance and rigidity in the most critical area.
- Comes with shoulder carry strap inserts. • Multiple layers of high-grade fiberglass are wetted out in epoxy resin wrapping the hull.
- All inserts have added high-density foam reinforcements.
Details
Reviews
There are no reviews yet.